Sarasota, Florida is known for its temperate weather that can reach sweltering temperatures of 90 degrees in the summer.
It’s critical to have a dependable air conditioner by this time and even more important to spot signs of repair or possible replacement.
Thus, every homeowner should understand the basics of HVAC system design in Sarasota.
In this post, you’ll learn about the ins and outs of efficient HVAC systems so that you can prepare early.
How Does Heating and Cooling Work In Sarasota HVAC Design?
If you have a Sarasota central HVAC system, the same system is used to cool and warm the air, depending on your needs. Since you live in Sarasota, you’re more likely to use the AC function over the central heating system; however, periodic cold spells may necessitate the need for heating.
A central Sarasota HVAC system design requires an indoor unit and an outdoor unit to absorb warm air indoors, cool and circulate cold air, and expel warm air out of the house.
If you want to warm your house during winter, your Sarasota HVAC system will automatically switch on its heat pump to pull in cold air from outside and draw it over a refrigerant. The refrigerant will attract heat to heat the HVAC coils. Air passes over the heated coils, raising the temperature, and blowing back indoors.
The AC function works similarly but with some noticeable differences.
First, the AC fan draws air into the unit where the air passes over evaporator coils. The refrigerant from the coils absorbs and cools the warm air. Next, the air travels to the handler, sending it through the AC ducts via the blower.
Ventilation In Residential Sarasota HVAC Design
HVAC systems need good ventilation mechanisms that filter and distribute clean air throughout the home. Thus, it’s important to periodically change your air filters to remove any dust and debris. You also need a functional ventilation system to regulate indoor humidity.
HVAC ventilation systems also come with built-in air purifiers that remove any hazardous particles like airborne germs, spores, dust, and bacteria. Filtering these indoor pollutants out of the home helps cut down on respiratory illnesses, fatigue, and migraines.
Thermostats and HVAC system optimization
If you’re noticing issues with HVAC functionality, check your thermostat first. A broken thermostat won’t let you set (or program) the right temperature.
Accuracy is essential with thermostats. When installing an HVAC system, you don’t want to install your thermostat on the other side of the kitchen wall. This will yield an inaccurate indoor temperature reading.
Make sure your thermostat is installed in a common area like a living room or family room. Collective body heat is also calculated when determining indoor temperature.
You can set your HVAC to power on when the indoor temperature reaches a certain amount.
Learn More About Your Sarasota HVAC System Design
Knowing how your Sarasota HVAC works will save you a considerable amount of money on air loss. You’ll notice the difference in your energy bill. Make sure your HVAC system design can support your home’s heating and cooling load.
Bowersox Air Conditioning and Heating want to be your full-service Sarasota HVAC solution. Our team is available 24 hours a day, which means we’re here to respond to your emergency requests quickly. You’ll also enjoy the lowest price for your service request.
We look forward to hearing from you!
Is Your AC Fan not Working?
Contact the trustworthy HVAC technicians here at Bowersox Air Conditioning and Heating. We’ll figure out the problem and have it up and running in a jiffy.
Schedule an appointment with us today
